Vega VEGAMIP U61, Руководство по эксплуатации

Страница: 23 / 40

W ith the mode adjustment ( max ./ min .) you can change the switching
condition of the relay . Y ou can set the required mode according to the
" F unction chart " ( max . - max . detection or over fl ow protection , min . -
min . detection or dry run protection ).
W
ith these keys
(
7
and
8
)
you can adjust the switching point to the
medium .
D epending on the process , the sensitivity of VEGAMIP
61
adjusted
more or less sensitive .
P ressing the "< -- " key makes the sensor more sensitive . P ressing the
" -- >" key makes the sensor less sensitive .
Y ou can also adjust the switching delay with the two keys .
B y means of the LED indicating board , you can see the actual
receiving level during adjustment .
W
hen the indication moves to the right
,
the instrument will be more
insensitive , to the left more sensitive .
6 . 2 A djustment
T he microwave barrier can only be adjusted when being uncovered .
M ake sure that there is no measured medium or vessel installations
between the emitting and receiving unit .
S elect the requested mode ( min ./ max .) according to the function chart .
T he following function chart provides an overview of the switching
conditions depending on the adjusted mode and level .
L evel S witching status S ignal lamp - R e -
lay ( yellow )
M ode max .
O ver fl ow protection
5 3 4
(8) (6) (7)
R elay energized
M ode max .
O ver fl ow protection
5 3 4
(8) (6) (7)
R elay deenergized
M ode min .
D ry run protection
5 3 4
(8) (6) (7)
R elay energized
M ode adjustment ( 1 )
S
ensitivity adjustment
( 7 , 8 )
LED indication strip -
receiving level ( 9 )
P rerequisites
M ode
VEGAMIP U
61
• - R
elay
23
6
S
etup
-
EN
-
100531