40
VEGALOG 571
Set-up
In this position, a fault signal function can be
co-ordinated to the switching outputs (relays
or transistors), which will later be available for
creating measurement loops. Click on
Save
,
when you have defined the switching out-
puts. The configuration as system failure is a
special feature. Only one single switching
output can be defined as system failure indi-
cation. The output does not show failures of
individual measurement loops, but failures of
the CPU (e.g. a total power loss of the CPU).
With
Quit
you return to the main window of
VVO.
Create new measurement loops
A number of applications can be created in
VEGALOG with the adjustment software
VVO. Click on
Configuration
in the main
window of VVO, point to
Measurement loop
and click on
New
. Then confirm the adjust-
ment “a new application“ with
OK
. The win-
dow “Create new measurement loop
-Application-“ opens.
First choose application (e.g. level measure-
ment), then the sensor (e.g. hydrostatic).
Then click on
Continue>>
.
Choose the mode (e.g. standard level meas-
urement) and the option. A possible option
would be, for example, “Real value correc-
tion“. Then click on
Continue>>
.
