26
VEGALOG 571
,,,
o o
o o
o o
o o
o o
Mounting
2.3 Selection of the plug position
The plug position for the individual cards is
initially individually selectable, the system
saves the cards’ positions when switched on.
Note:
The plug positions should not be modified
later on, as, otherwise, a new configuration
would be necessary for the measurement
loops already created.
Due to the bus board with the bus plugs,
there is a fixed pattern for the use of the
modules. It is, therefore, ensured that each
module card is inserted into the appropriate
multipoint connector, as well as into the LOG-
BUS-socket.
Number of TE:
- 84 TE, one thereof 4 TE-blind cover on
module 1
Width of the module cards:
- 5 TE for CPU and periphery
- 10 TE for VEGASTAB 593
Number of module cards in BGT LOG 571:
- 16 pieces (e.g. 1 x power supply unit, 1 x
CPU and 13␣ x peripheral cards)
2.4 Coding
A mechanical coding system avoids inter-
changing among the different module cards
in the carrier. It consists of:
- two coded pins in the multipoint connector
in the carrier
- two holes in the multiple plug of the appro-
priate component.
The coded pins are attached to the module.
Equip the multipoint connector with the two
coded pins acc. to the “Coding table“ and
“Position of the coded pins“. The function
coding characterises the module cards of
VEGALOG. The instrument coding differenti-
ates the individual module cards.
The multiple plugs of the individual module
cards are supplied with the appropriate
holes for the pin positions.
Instrument
Function
coding
coding
CPU-card
a1
c3
EV-card
a3
c3
AA-card
a5
c3
AR-card
a7
c3
AT-card
a9
c3
EA-card
a11
c3
AD-card
a13
c3
VEGACOM 557
a27
c3, c11
VEGATRENN 547V␣ Ex
a23
c11, c23
VEGATRENN 548V␣ Ex
a25
c11, c23
VEGASTAB 593
--
--
Coding table
Instrument coding
Function coding
o 9 o
z b d
o 1 o
a c
a1
a3
a5
a7
o 3 o
o 5 o
o 7 o
o11o
o13o
o15o
c3
o17o
o19o
o21o
o23o
o25o
o27o
o29o
o31o
a9
a11
a13
c11
c23
a23
a25
a27
(Ex-coding)
Position of the coded pins
Coded
pin
