Smart-MS0101 / User Manual
15
Revision
№ 03
-
“DEVICE INFO” TAB
The "Device info" tab displays information about the device, its current status, and also the
data needed to register the device in the LoRaWAN™ network (Fig. 4.3).
Fig. 4.3. The “Device info” tab.
ABP info - displays the data necessary to register the device in the LoRaWAN™ network
with ABP method (Activation By Personalization).
OTAA info - the data required to register the device in the LoRaWAN™ network with OTAA
method (Over The Air Activation) is displayed.
Regional info (not displayed in the "Simple" mode) - shows the frequencies of the JOIN
channels and the second receiving window. These frequencies can be changed in the
"LoRaWAN™ Settings" tab when selecting a frequency plan.
Device info - the configurator reads information about the device model, its firmware and
automatically corrects the device's time when connected to it.
Update firmware - allows you to select the firmware file from your computer's hard drive
and load it into the device. The device will automatically disconnect from the configurator when
