Smart-MS0101 / User Manual
5
Revision
№ 03
-
1 DESCRIPTION AND OPERATION
Infrared motion sensor Vega Smart-MS0101 is designed to detect penetration into the
protected area.
The sensor alternately operates in two modes: «Guard» and «Neutral». In the «Guard»
mode, the device sends an alarm message to the LoRaWAN™ network when motion is
detected, after which it switches to the «Neutral» mode for a while. In the «Neutral» mode, the
sensor does not send alarm messages when motion is detected. If the movement in the
protected area has ceased, then the device switches back to the «Guard» mode after a certain
configurable period of time.
Auto-post time interval is setting up by the «Vega LoRaWAN configurator» application
and may vary from 1 to 60 minutes.
Vega Smart-MS0101 can be used to protect premises, buildings and structures, as well as
in Smart Home systems, built on LoRaWAN™ technology.
The sensor is powered by a CR123A 1400 mAh replaceable battery.
The sensor is configured via USB with special software «Vega LoRaWAN configurator».
Information for registering of the device in the LoRaWAN™ network is available via
software «Vega LoRaWAN configurator».
