![background image](http://html1.mh-extra.com/html/vega-absolute/mt-x-can/mt-x-can_user-manual_3809694015.webp)
15
Revision 01 - 22.07.2019
sensor address on the bus in the “
Bus Address
” field. The specified address must match the address specified
when the sensor programming (see instructions for the used sensor). Up to four fuel level sensors can be
connected simultaneously.
EXTENSION UNIT
The Vega MT X CAN monitoring device allows you to connect the Vega BR-1 expansion unit via the
RS-485 or RS-232 interface. Vega BR-1 has 15 multifunction inputs and 15 digital outputs.
To configure the inputs, you must connect to the device
through the “Configurator” program, go to
the “Settings” section
to
the “Inputs/Outputs” tab and select the “
Input/output extension unit
” (see “Settings”
part). Next, you need to select the connection interface - RS-485 or RS-232. After that, you can configure
multifunctional inputs in accordance with the desired tasks (see the "Inputs" section of this part).
To configure the outputs, it is necessary to connect to the unit through the “Configurator” prog
ram,
go to the “Stat
e
” section
to
the “
Input/output e
xpansion unit” tab. At the very bottom of the I/O list of the
expansion unit are the digital output controls -
the “On” and “Off” buttons.