manualshive.com logo in svg

VeEX MTTplus-420, Руководство пользователя

Поделиться
Скачать
VeEX MTTplus-420 Скачать руководство пользователя страница 28

6.8.4 FiberScope Capture Screen

Real time video of the connector face. Red contours indicate scratches and defects.

Page 1 of the capture screen displays a live image of the connector face and features analysis and freeze tools.

Freeze / Resume: 

Stops the real time video to produce a viewable static image.

Analysis On / OFF: 

Turn the Auto Analysis ON and OFF (software option).

Auto Freeze: 

Turn On and OFF the ability to automatically freeze the image when the image comes into focus.

Rectangles / Dots: 

Dots draw a red contour around scratches and defects. Rectangles highlight scratches and defects

without obstructing the view.

Shake: 

Turn On or OFF the ability to Auto Freeze and Analyze when probe image is unsteady.

Page 2 displays all numeric results from defect and scratch events found for all four zones.

Scratch requirements refer to width.

 

This table will also be included in the reports.

Measured scratches and defects compared with threshold criteria for each fiber layer

MTTplus-420_User_Manual_RevC00

Page 28 of 75

Содержание MTTplus-420












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды