manualshive.com logo in svg

VeEX MTTplus-420, Руководство пользователя

Поделиться
Скачать
VeEX MTTplus-420 Скачать руководство пользователя страница 19

Optical fiber cleaning materials clockwise from left--isopropyl alcohol, lint free soft tissues,

connector reel cleaners, and a ferrule cleaner

Clean the connector end-face by rubbing it onto a lint-free wipe dampened with isopropyl

alcohol

Procedure

1.  Dab the contaminated connector end-face with a wipe that has been dampened with isopropyl alcohol - the solvent will

dissolve and remove contaminants that have dried and attached to the connector or fiber end-face.

2.  Rub the fiber end-face perpendicularly against a dry lint free wipe several times.

3.  Alternatively, use compressed air to dry the surface quickly. Do not blow or allow the connector end face to air dry as this

may leave a residue behind which is often more difficult to clean and which can attract even more dirt.

4.  Re-inspect the fiber end-face with an optical microscope to check that all the contaminants have been removed properly - if

not, repeat the process.

 

 

MTTplus-420_User_Manual_RevC00

Page 19 of 75

Содержание MTTplus-420












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды