6.8.2 FiberScope Setup - Page 1
Fiberscope Setup menu
Captured patch cord image files are saved within a folder directory. In the
Setup
tab, name each folder and file in the directory and
select a save increment.
Scope mode:
Sets Fiber Scope connection method.
Local
: Direct USB connection via micro-B USB port and micro-B USB-to-USB Type A OTG cable for DI-1000, DI-
1000MPO, and DI-3000.
Remote DI-3000
: Dedicated auto-connect option for DI-3000 WiFi usage only.
Auto Save:
Disable, Autosave on Tap, or Autosave after freeze. If either Autosave option is enabled, the unit automatically
saves and creates the filename using the Trace ID after the test. The file location and name will display.
Auto Save is available for single fiber analysis only.
When
Ask Before Save
is selected, the
Save
menu will display with naming and comment options.
Autosave on Tap
: On the
Capture
tab, tap the screen to automatically save the captured image. “Tap screen to save”
will appear to indicate that the feature is enabled.
Autosave after freeze
: Automatically saves the captured image upon freezing the image. (Auto-freeze enabled or
normal Freeze.)
Job ID
,
Cable ID
,
Fiber ID
, and
Trace ID
are nested folders that store saved results. Folders are nested in the following
order:
Job > Cable > Fiber > Trace
. Tap the blank fields to edit the names.
Increment:
Increments the selected ID name if the Auto Save option is selected.
Saved image files can be retrieved from
File Manager
(see
Managing Fiberscope Results with File Manager
for details) or
managed from the
Results
tab.
MTTplus-420_User_Manual_RevC00
Page 26 of 75
