VeEX FX8 Series, Руководство пользователя

Страница: 11 / 50

FX8x Series User Manual Page 11 of 50
5.0 Getting Started
Before using the device for the first time, fully charge the battery and set the local date and
time.
5.1 Battery Charging
Every unit is equipped with a built-in, rechargeable Li-Polymer 3A, smart charge battery and it
is partially charged upon delivery. However, VeEX recommends charging the battery to full
capacity before using the test unit for the first time.
The device can be operated with the AC/ DC adaptor plugged in.
When the test unit is plugged into AC/DC power, the Plugged icon ( ) appears on the top left
corner of the display. When the device is operating on the internal battery, the Battery icon ( )
appears.
It is recommended to charge the battery at room temperature to preserve its life
and to obtain maximum charge .
To charge the test unit, connect the AC/DC adaptor supplied with the unit to the micro-USB
service port located on the left side of the device. The battery charging time depends on the
battery condition and ambient temperature. Use only the cables provided with the device to
charge the battery.
While the battery is charging, the LED indicator on the front panel will be orange. When the
battery is fully charged, the LED indicator will be green provided the test unit is powered ON.
The LED will turn off when the unit is powered OFF.
The Li-Polymer battery is designed for maximum safety. However, the battery
may explode, leak, or catch fire when:
• It is exposed to high temperatures or fire.
• It is opened or dismantled.
An auto-off feature, configured in the
Settings
mode, powers down the unit on selected time:
OFF, 15, 30, or 45 minutes.
5.1.1 Battery Replacement
Battery replacement in the field is not authorized or permitted. The unit must be returned to an
authorized VeEX service center or partner for repair.