DOC. NO. 5956.6K6.00
P. 10 / 28
7 CYCLE SETTING
IIn this paragraph is explained how to change cycle phases duration (see paragraph 7.1 CYCLE DIAGRAM).
•
Switch on the dishwasher;
•
Enter into the FACTORY SETTING mode: press and hold down ON/OFF and BUTTON_2 keys for at least
5 seconds
(Figure 32);
•
Press BUTTON_2 key to select cycle 1 parameters.
•
Press BUTTON_3. The display shows alternatively the symbol
(Figure 35) and the corresponding
value
(Figure 36);
•
Use BUTTON_1 key to increase the value and BUTTON_2 key to decrease (Figure 36);
•
Press BUTTON_3 key to confirm. The display shows the next parameter (Figure 37) and the correspond-
ing value (Figure 38);
•
In the same way is possible to change the other parameters;.
After settled all parameters referring Cycle 1, by pressing BUTTON_2 key is possible to change the Cycle 2
parameters (Figure 39), (Figure 40) and so on.
Fig. 32 Factory setting mode.
Fig. 33 Select next class.
Fig. 34 Cycle 1 Family: ENTER.
Fig. 35 Wash duration [min].
Fig. 36 Change value & Store
Fig. 37 Wash duration [sec].
Fig. 38 Wash duration [min]..
Fig. 39 Cycle 1 Parameters.
Fig. 40 Cycle 2 Parameters:
ENTER.
Fig. 41 Wash duration [min].
Fig. 42 Cycle 2 Parameters:
next Family
Fig. 43 Cycle 3 Parameters:
ENTER
Fig. 44 Wash duration [min].
TANK
BOILER
FAC
1
2
3
CY1
1
2
3
FAC
1
2
3
Ln1
1
2
3
Sh1
0
1
2
3
35
1
2
3
CY2
CY1
1
2
3
Ln2
1
2
3
CY3
CY2
1
2
3
Ln3
1
2
3
