11
2.6 Analogue Settings
The ‘Analogue Settings’ menu allows you to calibrate the signals from a non-
electronic engine.
RPM calibration is a simple multiplier, have the engine running on idle and
adjust using the plus or minus until the number in brackets is the same as the
RPM shown on your gauge, or is reading the same as the idle RPM from the
Engine Manual.
You can use the arrow key’s to select, and the plus key to enter the next
screen to calibrate the rest of the channels. Once in the calibration screen,
for convenience, you can push Key 1, and it will move to the next channel.
