5
harness. The rudder sensor ground is connected to the spare black wire from
the display (used for all analogue senders).
1.7 Attaching to a Fuel Level Sender
The fuel level (one tank per display) can be measured from standard two wire
fuel senders. The sender signal should be connected to the blue wire of the
display harness. The sender ground is connected to the spare black wire from
the display (used for all analogue senders).
1.8 Attaching to a Trim/Tilt Sender
The tilt/trim (one per display) can be measured from standard two wire
tilt/trim senders. The sender signal should be connected to the orange wire
of the display harness. The sender ground is connected to the spare black
wire from the display (used for all analogue senders).
1.9 Attaching to a GPS NMEA 0183 Signal
A NMEA 0183 GPS can be attached to the unit to allow is to display SOG
(speed over ground) and COG (course over ground). The NMEA 0183 transmit
of the GPS should be linked with the green wire of the display harness.
