Veeder-Root EMR3 XStream-PKG Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 70

background image

EMR

3

Setup and Operation Manual

C&C Mode Setup Categories

43

DELIVERY OPTIONS

Figure 47 illustrates Delivery Options setup in C&C Mode. This option lets you enable or disable price changing
within the Delivery State as per your regulatory requirements. In this setup you also select coefficient (of
expansion) or density as the temperature compensation method for deliveries, enable delivery timeout, and enable
tank ID input.

Figure 47. Delivery Options

Idle State Safety Features

Two Idle State safety features (Stop Flow Timeouts) are built into the EMR

3

system.

•

Pressing the START button puts the EMR

3

into the Delivery State. If fuel flow is not detected within 1200 seconds (default),

the delivery is terminated.

•

A second idle state occurs when flow is halted during a delivery. The user has 180 seconds (default) to either push the
FINISH button to complete the delivery, or the START button to resume the delivery. If neither button is pushed within 180
seconds the delivery is terminated. This 180 second timeout can be enabled or disabled by the Delivery Timeout feature (see
Figure 47).

Note: Regardless of the Delivery Timeout setting (Enabled or Disabled), the nozzle icon (Figure 1 on page 4) will begin
blinking on and off 120 seconds after starting a delivery.

REPORT FORMATS

Figure 48 illustrates Report Formats setup in C&C Mode. In this setup you select which lines (printer labels) will print on
Delivery Tickets and Shift Reports. To edit label content see Figure 33 on page 31.

IMPORTANT! To select a printer format with Temperature Compensation or Pricing, the EMR

3

must have

performed one delivery using Temperature Compensation or Pricing.

DELIVERY OPTIONS

REPORT FORMATS
RESTART
SECURITY CODE
LANGUAGE
DISPLAY SYNTAX
TEMPERATURE
METER CALIBRTN
CONFIGURE I/O
OEM MESSAGE

PRICE CHANGING
TEMP COMPENSATION
DELIVERY TIMEOUT
TANK ID

ENABLE
DISABLE

Press the up/down
buttons to cycle
through remaining
C/C Mode categories

NEXT

NEXT

NEXT

COEFFICIENT
DENSITY

ENTER

ENTER

ENTER

NEXT

NEXT

ENABLE
DISABLE

+

-

+

-

+

-

+

-

+

-

+

-

+

-

SET
SECONDS

+

-

ENTER

ENTER

NEXT

DISABLE
ENABLE

NEXT

ENTER

ENTER

PRE-FLOW TIMEOUT
POST-FLOW TIMEOUT

NOTES:
If Price Changing is Enabled, and the Delivery Price option in Security
setup is set to Yes, the user can select from the Price Code list and change
price prior to pressing START, and after pressing START prior to pressing
FINISH.

If Price Changing is Disabled, and the Delivery Price option in Security
setup is set to Yes, the user can still select from the Price Code list and
change price prior to pressing START.

If Price Changing is Enabled or Disabled, and the Delivery Price option in
Security setup is set to NO for users 2 and 3, users 2 and 3 can only
select prices from the Price Code list prior to pressing START.

«
...
47
48
49
50
51
...
»

Содержание EMR3 XStream-PKG







































































Отзывы:

Нет отзывов

Похожие инструкции для EMR3 XStream-PKG

Бренд: TANDBERG Страницы: 53

Бренд: QMI Страницы: 54

Бренд: Teledyne Analytical Instruments Страницы: 107

Бренд: bmcm Страницы: 5

Бренд: Tektronix Страницы: 48

Бренд: janitza Страницы: 85

Бренд: LOVATO ELECTRIC Страницы: 10

Бренд: e-sylife Страницы: 2

Бренд: Interacoustics Страницы: 54

Бренд: PCB Piezotronics Страницы: 10

Бренд: SellEton Scales Страницы: 30

Бренд: Michell Instruments Страницы: 28

Бренд: 3nh Страницы: 39

Бренд: Konica Minolta Страницы: 48

Бренд: Vanguard Instruments Страницы: 85

Бренд: Kawai Страницы: 28

Бренд: THORLABS Страницы: 63

Rainbow RTI-Nano Series

Бренд: Laserworld Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды