Vectrix MAXI, Руководство пользователя, Страница: 37 / 52

Vectrix Electric MAXI-Scooter User’s Guide 37
BULB REPLACEMENT
WARNING!
Do not change bulbs immediately after run-
ning your scooter. Let the lights cool off. Bulbs
become hot when the scooter is running, and
need proper time to cool off. Hot bulbs can
cause severe burns if handled.
HEADLIGHT
To replace the headlight bulb you will need to
work behind the headlight fairing. Remove the
connector from the bulb. Pull the tab to remove
the protective cap. Release the clip that holds the
bulb in place and take the bulb out of the socket.
The headlight is a dual fi llament 2 x 35 watt
Philips HSR-1
NOTE!
Always hold the new bulb from the base. Oil
from human hands can cause the bulb to turn
black and become less brilliant.
LED LIGHTING SYSTEM
Due to the extremely long life of the LED lighting
system individual LED replacement is not expect-
ed. If a turn signal, stop/tail light, license plate light
or trunk light fails it is necessary to replace the
entire lighting module which has failed.