Picture guide for packing the parachute
In the following pictures we show you the recommended way to pack your VectorSave™
parachute. You will start by making sure lines are untangled.
In our tests we find that this is possibly the best way to pack parachute in right shape so
that it shoots out nicely every time.
If your package is too thick it and required a lot of power to push in you did not make it
right. Bad packing may jam parachute in the tube and cause deployment failure.
Please be careful here - practice and do tilt test to get it right.
Make sure lines are untangled. Clear them if necessary,
Содержание 10 Mavic
