background image

  S-19-01-1125-UV101 V1.3 

1. PRECAUTIONS AND SAFETY NOTES 

 
PLEASE NOTE! 
Prior to installation and start-up of the unit, carefully read the instructions provided herein! 
As with all technical devices, the proper function and safe operation of this unit depend on the user’s 
compliance with the safety recommendations presented in these operating instructions. 
 

  CAUTION: This curing unit produces high curing energy output! A significant increase in curing 

energy is possible compared with conventional Halogen equipment you have previously used. Do not 
place light directly on or toward unprotected gingiva or skin. Exposure of the soft tissues (gingiva, oral 
mucosa and skin) to high-intensity light may cause damage or irritation. 
 
Adjust your curing techniques in accordance with the increase in curing energy. Some examples are; 
decrease curing time, increase composite thickness, increase distance between light guide  exit and 
light cured materials e.g. 
 

  CAUTION: Do not look directly into the light emitted from this curing unit. It may be harmful to 

the  eyes.  Exposure  must  be  restricted  to  the  area  of  the  oral  cavity  in  which  clinical  treatment  is 
intended. Do not use this device without suitable protective eye shield for the operator, assistant and 
patient. Suitable protective eye shield should blocks most energy below 550nm wavelength. 

  CAUTION: Persons having a history of photosensitive reactions or who are using photosensitizing 

drugs should not be exposed to the light from this unit. 
 

  CAUTION: Equipment is not suitable for use in the presence of flammable anesthetic mixture with 

air, nitrous oxide or environment full of flammable material. Use in well ventilated area. 
 

  CAUTION: DO NOT IMMERSE UNIT IN WATER OR DISINFECTANT. Do not spray liquids directly 

onto the light. Spray a towel, then wipe the light. Prevent liquids from entering openings on unit, 
especially the socket for re-charging. Refer to Section 10, Cleaning / Disinfecting / Sterilizing for 
sterilizing instructions. 

  CAUTION: Always unplug the base/charger before disinfecting. 

  CAUTION: Don’t dispose of the battery into fire or take battery apart. 

Содержание LED-P
















Отзывы: