OPA2-MOD(-H)
Configuration
Doc: 70-00-0290, V1.0 R0, Date: 20160208
© Vector Controls GmbH, Switzerland
Page 11
Subject to alteration
Input configuration
Address
Type
R/W
Contents
10000
bit
R/W
Enable internal temperature sensor
0 = Sensor disabled
1 = Sensor enabled
10001
bit
R
Error state of internal temperature sensor
0 = OK
1 = Error
10002
16 bit signed R
Measured value of internal temperature sensor
10003
16 bit signed R/W
Internal temperature sensor calibration (-12,7…
0
…12,7 °C/°F)
10100
bit
R/W
Enable internal humidity sensor(for –H type only)
0 = Sensor disabled
1 = Sensor enabled
10101
bit
R
Error state of internal humidity sensor (for –H type only)
0 = OK
1 = Error
10102
16 bit signed R
Measured value of internal humidity sensor (for –H type only)
10103
16 bit signed R/W
Internal humidity sensor calibration (-12,7…
0
…12,7 %)
10200
selection
R/W
Enable external temperature input
0 = Input disabled
1 = Input enabled
10201
bit
R/W
Error state of external temperature input
0 = ok
1 = error
10202
16 bit signed R
Measured value of external temperature input
10203
16 bit signed R/W
External temperature input calibration (-12,7…
0
…12,7 °C/°F)
10300
bit
R/W
Digital input “1” function assignment:
0: No function assigned
1: Remote disable: Key card or Window contact
2: Comfort/Standby changeover: Key card or motion detector
10301
bit
R
Digital input 1 value
10302
byte
R/W
Digital input 1 open character 01
10303
byte
R/W
Digital input 1 open character 02
O
10304
byte
R/W
Digital input 1 open character 03
F
10305
byte
R/W
Digital input 1 open character 04
F
10306
byte
R/W
Digital input 1 closed character 01
10307
byte
R/W
Digital input 1 closed character 02
O
10308
byte
R/W
Digital input 1 closed character 03
N
10309
byte
R/W
Digital input 1 closed character 04
10400
bit
R/W
Digital input “2” function assignment:
0: No function assigned
1: Remote disable: Key card or Window contact
2: Comfort/Standby changeover: Key card or motion detector
10401
bit
R
Digital input 2 value
10402
byte
R/W
Digital input 2 open character 01
10403
byte
R/W
Digital input 2 open character 02
O
10404
byte
R/W
Digital input 2 open character 03
F
10405
byte
R/W
Digital input 2 open character 04
F
10406
byte
R/W
Digital input 2 closed character 01
10407
byte
R/W
Digital input 2 closed character 02
O
10408
byte
R/W
Digital input 2 closed character 03
N
10409
byte
R/W
Digital input 2 closed character 04
Use Remote disable for key cards or window contacts. If the digital input is opened the device will switch to OFF mode
after the delay defined with address 1023 (CP19) has expired. Closing the contact will switch the device back on
immediately. The delay is defined in seconds.
Use comfort/standby changeover with key card switches and occupancy sensors. The device will be in occupied mode
as long as the digital input is connected to signal ground. Once the input is opened it will switch to unoccupied mode
after the delay defined with address 1024 (CP20) has expired. The delay is defined in minutes.
