VECTOR CONTROLS TRI2 Series, Руководство по эксплуатации

Страница: 16 / 18

X2-O
PERATIONS
M
ANUAL
T
OUCH
D
ISPLAY
Doc: 70-07-0951A, 20220504 © Vector Controls LLC, USA Page 16-18
Subjects to alteration www.vectorcontrols.com
V
ECTOR
5.5 Display input and output states
Overview
In the input or output submenu there are 4 different display options:
UI = Display of universal inputs (view input values)
Ao = Display of analog outputs (view and set output values)
FAN = Fan display (view and set fan speeds)
do = Display of digital, 3-point or PWM outputs (view and set output signals)
Deactivated inputs are not displayed!
Procedure
1. Press the (

) button longer than 2 seconds
2. Press the ( ) or ( ) button until the universal input submenu UI and
SEL is displayed.
➔
U – I and SEL is displayed.
3. Press the (

) button and select one of the universal inputs with the
( ) ( ) button.
➔
U-I , the input number and the value are displayed.
4. To go back to the previous submenu, press the ( ) button (1x).
5. Press the ( ) button to go to the analog output submenu.
➔
Ao and SEL is displayed.
6. Press the (

) button and select one of the analog outputs with the ( )
( ) button.
➔
Ao , the output number and the value are displayed.
7. To go back to the previous submenu, press the ( ) button (1x).
8. Press the ( ) button to go to the fan output submenu.
➔
FAN and SEL is displayed.
9. Press the (

) button and select one of the fan outputs with the ( )
( ) button.
➔
FAN , the output number and the value are displayed.
10. To go back to the previous submenu, press the ( ) button (1x).