Cleaning
To clean the filters and heat exchanger:
1. Remove the front cover (see page 14).
2. Slide out the filters that are fitted either side
of the heat exchanger as shown.
3. Remove the heat exchanger by gently pulling
the plastic band around it.
4. Clean the filters carefully using a vacuum
cleaner.
5. Carefully remove any dust from the face of the
heat exchanger using a vacuum cleaner.
Never use water or any other fluids to clean
the heat exchanger.
6. Return the heat exchanger and filters to their
original position.
7. Replace the front cover and ensure it is
securely located at the top before tightening
all screws.
8. Power to the unit can now be restored.
Filter Replacement
Filters should be replaced annually or after a maximum of 3 cleaning cycles.
Replacement filters are available from Vectaire - call us on +44 (0) 1494 522333 or via
[email protected]
After servicing, always complete the service record on page 16.
Page 15
Servicing & Maintenance
