Vectaire eSmile, Инструкция по установке и эксплуатации, Страница: 9 / 11

9
OPERATION
ES1003, ES1003CF, ES1003LV - these fans
combine the latest technology with energy saving
and efficiency. They are quiet running, 3 speed
fans, designed to run continuously at a pre-
selectable choice of 2 lower speeds (fixed at
installation). The user can boost the fan speed to
maximum performance when required by means
of the cord The fans can also be operated using
a remote switch (light, PIR, humidistat, etc)
instead of the cord.
The ES1003 is SAP
Appendix Q Listed .
ES100H2C and ES100H2CLV - humidity control
models - the fans will start to operate automatical-
ly at their lower speed when the relative humidity
reaches the pre-set level and will continue to
operate at this speed until the humidity has been
dispersed. The user can use the cord to operate
the fan (at its higher speed), or to boost the fan
speed if it is already running. Pulling the cord
again will revert the fan to its lower speed, and it
will continue to run either until the humidity has
been removed, or the fan has completed the
timer over-run period (adjustable between 3 and
25 minutes). The fan's "
comfortimer ” technology
allows the fan to run at low speed for its over-run
period. The humidistat is adjustable from 40% to
90% relatve humidity. The fans can also be oper-
ated using a remote switch instead of the cord
(when installing with remote switch, pullcord
switch must be left in "off" position and cord
removed).