Vectaire eSmile Скачать руководство пользователя страница 2

"E-Smile” - THE POWERFUL CARBON FRIENDLY FANS
INSTALLATION and OPERATING INSTRUCTIONS

THIS LEAFLET MUST BE AVAILABLE TO THE USER

The  product  you  have  purchased  is  an  extractor
fan for exhausting directly outside or through medi-
um  lengths  of  ducting  and  is  suitable  for  wall  or
ceiling  installation.  To  ensure  optimum  operation
and guarantee a long life, please read this manual
carefully.    It  explains  how  to  install  correctly,  use
and  maintain  the  product  properly.    Following
these  instructions  will  ensure  the  reliability  of  the
product and extend its working life.  

The manufacturer will not be held responsible
and will not accept any responsibility for dam-
age  caused  to  persons  or  things  due  to
improper use with reference to the precautions
outlined in this leaflet.

The  product,  constructed  using  state  of  the  art
technology,  complies  with  current  standards
regarding  electrical  equipment.  It  conforms  with
the  EMC  2014/30/EU  European  Directive  regard-
ing  radio  interference  suppression  and  electro-
magnetic compatibility.

WARNING:  Serious  injury  or  death  could  result  if
these instructions are not carefully followed

Do not use this product for any purpose other 
than that for which it was designed.

Remove the product from its packaging and make
sure that it has not been damaged.  If in doubt,
contact the supplier, authorised dealer, service 
centre or manufacturer to check that the prod
uct will still operate correctly.  Do not  attempt 
to use or repair the product before doing this.

Do not leave packing material within the reach 
of children or unskilled people.  To dispose of 
the packaging and the appliance at the end of its
useful life refer to the recycling norms in force.  

The use of any electrical product requires 
compliance with some basic rules which are 
listed below:
- do not touch it with wet or damp parts of the 

body (e.g hands, feet).

- this appliance can be used by children aged 

from 8 years and above and persons with 
reduced physical, sensory or mental capabili-
ties or lack of experience and knowledge if 
they have been given supervision or instruc
tion concerning use of the appliance in a 
safe way and understand the hazards in-
volved. Children shall not play with the appli
ance. Cleaning and user maintenance shall 
not be done by children without supervision.

• The product should be connected to the mains 

electricity supply or electrical outlet only if:
- the electrical voltage and frequency corre-

spond to those shown on the rating label.

- the capacity of the electricity supply is suffi-

cient to operate the product at its maximum 
power.

- suitable electrical protection must be provid-

ed for the product to be installed.

• The electrical supply to which the fan is con-

nected must comply with all existing regula-
tions. All installations must comply with current 
IEE wiring regulations.

• Before maintenance or cleaning is carried out, 

the product must be switched off and discon-
nected  from the mains electricity supply.

• If a fault, malfunction or anomaly of any type 

occurs, the fan should be isolated (switching it 
off and disconnecting it from the mains electric
ity supply) and advice sought  from qualified 
personnel.

2

Содержание eSmile












Отзывы: