Vecow SPC-5000, Руководство пользователя

Страница: 39 / 109

32 ©Vecow SPC-5000 User Manual GETTING TO KNOW YOUR SPC-5000
2.4.1.10 CN13 : LAN1 + LAN2
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side of EMBC-3000. LAN1 is powered by Intel ® I219-LM
Ethernet engine; LAN2 is powered by Intel
®
I210-IT Ethernet engine. When both
LAN1 and LAN2 work in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect EMBC-3000 system to a computer
or to any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both LAN1 and LAN2 supports Wake on LAN and Pre-boot functions.
The pinouts of LAN1 and LAN2 are listed as follow :
Pin No. 10/100 Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ------ MDI2_P
5 ------ MDI2_N
6 E_RX- MDI1_N
7 ------ MDI3_P
8 ------ MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color 10Mbps 100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left Green
Twinkling
Green
Twinkling
Green
Twinkling
Green
8 1
LAN1 LAN2
CN13