background image

Audible messages

As soon as guidance is activated, audible routing information is provided in addition
to the symbols on the guidance screens.

You didn’t hear the information?

Press the

VOICE

button on the remote control.

(On the RC 5000, press the

{

button.)

:

The last direction is repeated and/or updated driving directions are provided.

If the symbol

l

flashes in the status line, the audible information is switched off.

Press the

V

or

W

button on the remote control to activate the messages again.

Planning an alternative route

During guidance it is possible for the navigation system to plan an alternative route to
cover a distance which you can select. Use this function, e.g. if you wish to avoid sta-
tionary traffic, or if you do not agree with the current routing. The alternative route will
be calculated for the specified distance from the vehicle’s current location.

Press the

ALT-R

button.

:

The system now displays the distance for which the alternative route is to be planned.
This can be set from 1 to 50 km.

Select the value next to “Distance:” and press the

OK

button.

Set the value with the cursor buttons and then press the

OK

key.

Select the option “Yes” if you want to apply the entered value and start the planning
of the alternative route.

Select “No” if you want to cancel the planning of the alternative route.

Screen displays

Four types of screen display are available for guidance:

Symbols: Graphic display of the “turn-now” advice.

Map*: Map display of the planned route. The arrow shows the current vehicle
position.

and the combination of both display types (split screen):

Map* / symbols

Map* / trip computer

Switching display type

By pressing the

NAVIGATION

or

MAP

button, you can switch between the various

display types:

* The map display can optionally be shown in 2-D or 3-D (with perspective) format.

Navigation

18

Содержание MS 5600 -




















































Отзывы: