![background image](http://html1.mh-extra.com/html/vdo/ms-5400/ms-5400_manual_3741249008.webp)
Areas with limited road information
In some areas, not all road information may be available on the map
DVD/CD. Thus, for example, turn-off prohibitions, information on the
direction of travel in a one-way street or prohibited entry into a
pedestrian zone may be missing. The navigation system will display a
warning if you drive into such an area.
t
Information concerning the functions of the navigation system can be
found on the internet at www.vdodayton.de.
Switching on / off
The multimedia system is switched on and off along with the ignition. If
the system was not switched to stand-by prior to switching off, a title
screen will be displayed. This is followed by information on how to
operate the system. Confirm this by pressing the OK key. After a few
seconds, the system will be functional.
Remote control
If you wish to use the remote control outside the cradle, batteries will be
required and these will have to be replaced if the system no longer
responds when the buttons are pressed or if the battery symbol appears
in the status line. Please remember that the remote control must not be
exposed to direct sunlight if batteries have been inserted. The system can
always be used whenever the remote control is inside its wired cradle; for
this no batteries are required.
Some buttons and keys have two functions, which are activated
respectively either by pressing them briefly for less than a second or by
pressing and holding them down for more than a second.
Depending on the scope of supply, various remote controls might be
used. Full functionality can only be ensured if the correct remote control
is activated. To do this, select “Remote control” under “Settings” and
activate the desired remote control by pressing the OK key.
8
GENERAL INFORMATION