The navigation system uses an average cruising speed to calculate the
remaining travel time and the estimated time of arrival. If required, this
speed can be adapted to your actual average speed by means of the
option “System information/Speed correction”.
Message selection
After this function has been selected, a list will be displayed, from which a
selection can be made as to which TMC information is to be displayed.
TMC information can only be displayed if a suitable TMC source is
connected, and the map DVD/CD contains TMC data.
u
Select “Traffic info” in the “Settings” menu. Press the OK key.
u
Select the options to be set, and activate or deactivate them by
pressing the OK key.
u
Select “Store” and press the OK key.
u
Select “Deselect all” and press the OK key to deactivate all options
in this menu.
Route criteria
Various criteria can be selected for route calculation:
•
Fast: suited to all situations.
•
Short: recommended for trips within cities.
•
Main roads: recommended if you prefer routes that use freeways
(motorways).
•
No main roads: recommended if you wish to avoid routes that use
freeways (motorways).
•
Minimize toll roads.
•
Minimize ferry usage.
•
Minimize tunnel usage.
•
Traffic Info: switches dynamic route guidance on and off.
The symbol for the selected route criterion is displayed in the status line.
Adjust/change route criterion:
u
Select “Route criteria” in the “Settings” menu, and press the OK
key. A list with the route criteria is displayed.
u
Select the desired route criterion and confirm by dressing the OK
key. The symbol for the newly selected route criterion is displayed
in the status line
Only activate the “Minimize toll roads” option if you wish to use as few
toll roads as possible. Note concerning toll roads, ferries and tunnels:
These functions can only be used if the corresponding information is
available on the map CD.
19
GENERAL INFORMATION
