VDO MS 5000 -, Руководство пользователя

Страница: 137 / 181

Operation
137
English
“System Information” function
The “System Information” menu offers the following functions:
• “Diagnosis”:
for analysing hardware and software problems (code-
protected – only for authorised service personnel).
• “Default settings”: reset the settings in the “Settings” menu to the factory-
adjusted values; see “Default settings” on page 169.
• “Configuration”: Information on software and hardware
(for service purposes).
• “Speed Correction”: Relative change of the value for the average speed for
all road classes (affects the calculation of the remaining
travel time and the estimated time of arrival).
“Security Module” function
This function is used to switch on (“active”) or switch off (“inactive”) detection of
whether the correct security module is being used.
— Select the “Settings” function in the “Start Menu”.
The “Settings” menu appears.
— Select the “Security Module” function.
— Select the corresponding entry (“Active” or “Inactive”) in the list that appears.
See also “Theft protection” on page 131.
“Traffic info.” function
After selection of this function a list appears with the kinds of TMC information that
can be selected.
TMC information can only be displayed if a suitable TMC source is connected and the
maps that are used include TMC data (recognisable on the CD label).
The respective message (current cursor position) is switched on or off by pressing the
OK -button; messages that are switched on are shown by the symbol
;
.
Particularly urgent traffic messages cannot be switched off and are indicated
both on screen and as audible messages.
DE-IT-E_MO_MS5000.book Page 137 Sunday, November 7, 1999 10:57 PM