Associate the display to a group
1. Press
to access the main menu and then scroll and select
NETWORK
.
2. Select
Group instruments
: the display blinks and the list of all devices on the network appears.
3. Scroll and select the display.
4. Scroll and select the group to be associated to the display.
5. If necessary, repeat steps 3 and 4 for all devices on the network: each time, the display of the
selected device blinks.
6. Hold down
to save settings and return to the data page.
Match an engine to a tachometer
1. Press
to access the main menu and then scroll and select
NETWORK
.
2. Scroll and select
Tacho instance
: the list of tachometers on the network is displayed; the first on the
list is selected and blinks.
3. If necessary, scroll and select a different tachometer.
4. Scroll and select the engine ID to be monitored.
5. Hold down
to save settings and return to the data page.
Order of displays on the network
When there are several AcquaLink displays on the VDO CAN bus network, each display is automatically
assigned a progressive ID (1, 2, 3 etc.). The ID indicates the order in which the displays can be selected
through Nav Control. If necessary, the order of the displays can be changed.
Management of network devices
39
7” TFT display | Instruction manual v. 1.0 | © 2018 Continental Automotive Switzerland AG
Содержание AcquaLink A2C59501997
