VDH 907.000401, Руководство по установке

Страница: 4 / 68

PROBA 5
Doc.nr: 190356 Version: 1.0
Page 4
s
Afety
Read this first!
Before the installation is going to be used, the instructions mentioned
below have to be considered. The guarantee of the installation expires if any
damage, failure or shortcoming is a result of negligence or non-observance
of the points mentioned below.
⇒
These rules of prevention of accidents must be kept near the
machine.
⇒
To prevent a lack of clarity in pictures it is prohibited to make copies
of this document. Only original colour-prints guarantee a clear result.
⇒
Use the installation only as described in this manual. Other use
van lead to dangerous situations and/or damage to installation or
products.
⇒
Always observe the local safety and installation regulations.
Do not ignore local regulations or access protocols.
⇒
Activities in or on the PROBA 5 Compact must be carried out by
qualified and authorized personnel only.
⇒
Be sure to remove all tools from the machine after any maintenance.
⇒
Take precautions to prevent electrostatic discharge.
⇒
At normal use there are hazardous voltages present in the PROBA 5
Compact.
⇒
Turn off all power supply before opening the PROBA 5 Compact.
Please ensure that during activities in the cabinet all voltages are
switched off and they can not be enabled.
⇒
The PROBA 5 Compact must be connected to an earthed (grounded)
power supply to comply with international safety standards.
⇒
Connect the signal I/O ports of the PROBA 5 Compact only to devices
which have a galvanic separated power supply to it’s low voltage
output section.