VCS Videojet EE, Руководство пользователя

Страница: 9 / 78

11
VideoJet
Safety information
2
Electrical shock hazard
z
Never attempt to connect the unit to any power network other
than the one for which it was intended.
z
Use only the mains lead supplied.
z
Do not open the housing of the power supply unit.
z
Disconnect the power supply unit from the mains power supply
and from all other devices if a fault occurs.
z
Install the power supply unit and server only in a dry place pro-
tected against the elements.
z
If you are uncertain about the safe operation of the unit, shut it
down immediately and secure it to prevent any unauthorised
start-up. Safe operation is no longer possible, for example,
– if damage is visible to the server of the cables,
– if the server no longer operates correctly,
– if the server has been exposed to rain or moisture,
– if objects have penetrated inside the server,
– after long storage under improper conditions or
– after heavy demands during transport.
Have the system checked by VCS in such cases.
Installation and operation
z
All applicable electrical codes and regulations must be observed
and followed at all times during the installation.