VCS VideoJet 400 19", Руководство пользователя

Страница: 26 / 86

Installation
28
VideoJet 400
Commissioning
with terminal program
Data terminal You can connect a data terminal to the
VideoJet 400
for putting
the unit into operation and for the local control. The data terminal
consists of a computer with a terminal program. For the connection
use a serial standard cable.
You can use e.g. the Windows application HyperTerminal as termi-
nal program.
)
First, disconnect the
VideoJet 400
from the network.
)
Connect the sub-D jack COM of the VideoJet 400 to a free
serial port of the computer.
Configuring the
terminal program The transmission parameters have to match for communication
between terminal program and
VideoJet
. Set the following values
for the terminal program:
z
19,200 bits/s
z
8 data bits
z
No parity check
z
1 stop bit
z
Protocol Xon/Xoff
Note
Information on the installation and use of HyperTerminal can be
found in the documentation or in the online Help for Windows.