manualshive.com logo in svg

vc999 K7, Руководство по эксплуатации, Страница: 8 / 121

Поделиться
Скачать
vc999 K7 Скачать руководство пользователя страница 8

Vacuum Packaging Machine VC999 K7  

Introduction 

 

 
 
 

 
 
Page 8/121 

 

Art.-No. 592.016 

2008-11-26 

1 Introduction 

 

1.1 General 

information 

 

• 

This operator manual is an integral part of your machine. The information and safety instructions 
contained herein have to be carefully read and adhered to by members of staff authorised to operate 
the machine. Superiors who are responsible for machine operation shall be liable for damages and 
their consequences resulting from incorrect handling of the machine. It is therefore in the interest of 
the operator that this operator manual is strictly adhered to. 
 

• 

The manufacturer shall not be liable for any damages which occur due to non-observance of this op-
erator manual in its entirety. 

 

• 

Only the information contained in this operator manual can prevent faults during operation and guar-
antee trouble-free operation. It is therefore imperative that this operator manual is actually read und 
understood by members of staff authorised to operate the machine. 

 

• 

This machine is a state-of-the-art device at the time of delivery. It complies with CE regulations and 
the latest version of machinery directive 98/37/EC at the time of delivery. 

 

• 

In the unlikely event that problems should occur, or if questions arise, please do not hesitate to con-
tact our Customer Service. 

 

• 

Due to technical changes and improvements to the machine some of the diagrams contained in this 
operator manual may not be exact. However, the diagrams are fully understandable in order to ex-
plain processes or a course of action. 

 

• 

We reserve the right to change dimensions and construction of the machine. 

 
 

 

 

 

Customer Service Dept. Switzerland 

The manufacturer’s address is displayed on the name plate. Always state the type of machine and the 
machine’s serial number, which are also displayed on the name plate, when contacting us. 
 

Manufacturer: 

Inauen Maschinen AG 

Address: Melonenstrasse 

2 

 

CH-9100 Herisau / Switzerland 

 
Phone: 

++41 (0)71 35 35 900 

Fax: 

++41 (0)71 35 35 901 

E-mail: 

[email protected]

 

Website: 

www.vc999.biz

 

 

Represented by: 

 

Содержание K7


























































































































Отзывы:

Нет отзывов