vc999 K7, Руководство по эксплуатации, Страница: 63 / 121

Vacuum Packaging Machine VC999 K7
Operation
2008-11-26
Art.-No. 592.016 Page 63/121
9.8.2 Mask 157: Defect Modes
The functions and measuring instruments listed in this
mask can be switched on or off.
This can be useful during set-up or test runs and if one
of the measuring instruments displayed here becomes
defective.
Fig. 9/24
Explanation of the parameters
Parameter Function Possible
settings Factory
settings
Time-based
vacuuming This vacuuming mode is explained in the
description of Mask 101/102: Parameter 1/2
under "Vacuuming mode".
Programs can neither be loaded nor saved
when this function is switched on.
on
off
off
Display of operating
messages The display of operating messages must
only be deactivated if regular maintenance is
still ensured. If this function is set to "off", no
operating messages will appear anymore on
the display.
on
off
off
Communic. with
frequency converter There is no communication with the fre-
quency converter. A change of speed or
ramp is not written in the frequency con-
verter.
on
off
off
Limit switch for lid
position
Monitoring the vacuum chamber
If a limit switch of the vacuum chamber lid is
defective, the defect mode can be activated
here. The vacuum chamber lid is then
opened and closed in a time-based manner.
The limit switches are no longer relevant.
on
off
off
Sensor for sealing
bar position If one or both of the position sensors on the
sealing bars are defective, you can deacti-
vate the detectors individually.
Deactivate in emergencies only, as oth-
erwise there is danger of damaging the
machine!
on
off
off
Sensor for conveyor
belt position Monitoring the conveyor belt position
on
off
off