vc999 K7, Руководство по эксплуатации, Страница: 56 / 121

Vacuum Packaging Machine VC999 K7
Operation
Page 56/121
Art.-No. 592.016 2008-11-26
Entering parameter values
•
The vacuuming mode must be defined first: Press the input field after Vacuuming mode in the mask
and select the desired vacuuming mode from the list.
The selected vacuuming mode is now displayed in the input field. All the parameters for this vacuuming
mode appear as an input field highlighted in white and can be edited. Parameters highlighted in gray
cannot be edited.
•
To enter values, press the input field of the parameter. After each entry, press the ENTER but-
ton. This ensures that the entered value is saved and the keypad is hidden.
If an entered value is outside the setting range, a warning message will appear. Always observe the
permissible setting range of the parameter and enter a corresponding value.
All the parameters are described in the following sections "Overview of parameters" and "Explanation of
parameters". The table below displays an overview of all the parameters and their allocation to the vac-
uuming modes.
Overview of parameters
Vacuuming modes
Parameter
Setting ra
ng
e
Factory se
tti
ngs
Set point Evapora
tion
Satge
-va
cuu
m
Time
(emrg
. ope
ration)
Vacuum set point 500 - 999 996 • • •
Vacuum stage 50 - 499 250 •
Vacuum holding time 0 - 300 s 20 s •
Evaporation sensitivity 0,1 - 10,0 s 1.5 s •
Pre-ventilation pressure 500 - 999 999
(no pre-ventilation)
• • •
Intermed.-ventilation time 0,0 – 1.5 s 0.0 s (•)
Intermed. ventilation value 500 - 999 - (•) (•) (•)
Pre-ventilation time 0,0 – 9.9 s 0.0 s •
Vacuuming time 1 - 60 s 10 s •
(•)
Only possible if the function "Intermed. ventilation" is set to "on" in Mask 156: Service parameter.