vc999 07P Series, Руководство оператора

Страница: 43 / 74

Vacuum Packaging Machines 07P ...
Malfunctions
11.1.1 Sealing current monitoring
The machine is equipped with a sealing power monitor which checks whether the sealing and cutting
function properly.
If there is an interruption in one of the selected sealing power circuits, an error message appears during
the packaging cycle. You will be asked to press the
STOP button briefly. An automatic error diagnosis
now takes place. The result appears at the display symbolically: “OK” for in order, “ER” for error, “00”
not programmed.
Example:
Seal
top left front right cutting left front right
Fig. 11/1
Seal bottom left front right
In this example the cutting power circuits of the left and right sealing bars are interrupted at the (ER).
The bottom row is only displayed with countersealing.
CAUTION
During the diagnostic process, the machine must not be turned off at the main switch.
After reading off the diagnosis press the STOP button again. The machine completes the already
started cycle. On restarting the error will not be displayed again. In this way it is possible to work in
emergency operation with the sealing bars in which
no “ER” (error) was shown.
If the error is not corrected immediately, it is displayed again when the machine has been switched off
and started again.
Please check sealing bar, possibly a mains automatic circuit breaker (Fig. 3/2, Pos. 18) has been
triggered. Possibly contact VC999 customer service department.
2003-11-05
Art. no. 527.763 Page 43/74