vc999 07P Series, Руководство оператора

Страница: 42 / 74

Vacuum Packaging Machines 07P ...
Malfunctions
Nr. Fault Cause Remedy
32 CHECK PUMP
AND/OR VACUUM
MEAS. SYSTEM
Measuring switchover valve
defective, pressing membrane of
the sealing bar not tight,
Measuring hose has loosened
itself from sensor. Call VC999 Customer Service Dept.
34 OPEN LOOP AT
TEMPERATURE
MEAS. SENSOR Plug not properly pushed in
(Chapter.12.4.4.1)
Cable break Insert plug
Call VC999 Customer Service Dept.
35 SHORT CIRCUIT AT
TEMPERATURE
MEAS. SENSOR Overheating of the sensor, short
circuit on the sensor or supply
cable.
Setting of the sealing time
adjustment too low.
Call VC999 Customer Service Dept.
Undertake a calibration of the
sealing time correction (Chapter.
12.4.4.1)
36 VACUUM RELEASE
(VENTILATION)
MALFUNCTION
Air inlet filter blocked, Valve
defective. Check preventilation
64 LID OPEN SWITCH
NOT ACTIVATED
65 LID CLOSED
SWITCH NOT
ACTIVATED
End switch setting incorrect
Mechanical obstruction of
movement.
Main ventilation too slow.
End switch defective
Defect in the supply to the end
switch or valve.
Check end switch setting
Check mechanical movement
Call VC999 Customer Service Dept.
Replace end switch
Call VC999 Customer Service Dept.
66 TOP POSITION OF
PLATFORM NOT
REACHED Position pickup defective or not
properly adjusted
Platform cylinder not working
correctly Check cycle count in the Service
program (Chapter. 12.4.3) and
inform VC999 customer service
Dept.
67 PLATFORM LEVEL
IS NOT
ADJUSTABLE
Position pickup defective
Position pickup incorrectly
connected
Platform cylinder not working
correctly
Check position pickup
Check connection
Call VC999 Customer Service Dept.
99 MACHINE
MALFUNCTION
NOT ANALIZED
Too low voltage supply Check power supply
Call VC999 Customer Service Dept.
As soon as these errors occur, the corresponding text will appear at the display until they are
confirmed with the
STOP button. The machine returns to the initial position.
Page 42/74
Art. no. 527.763 2003-11-05