Using your machine
Using your machine
NOTE:
Carpets should be dry vacuumed thoroughly before washing. For heavily soiled areas, it may be necessary to repeat
the cleaning process. Make crisscrossing strokes to the original pattern and overlap each pass.
Pour required amount
of carpet cleaning
solution into the clean
water/solution tank.
Press the recline
pedal and pull
handle backwards.
Fill the clean water/
solution tank with warm
water (max 40’C).
Squeeze the trigger to
release solution and
water mix.
Turn wash/rinse dial to
‘wash’. The SpinScrub
brushes and brushbar
deep clean your carpets
with water and solution
removing dirt and stains.
For best results apply
water/solution on the
forward stroke and
release the trigger to pick
up water/solution on the
backward stroke.
Plug into mains,
press the On/Off
button to switch on.
Turn wash/rinse dial
to ‘rinse’. Only water
is released to remove
solution residue.
Press the boost trigger to
remove tough stains.
TIP
For best cleaning results use
slow
straight parallel strokes.
Intermittent dry forward
strokes will increase water
pick up.
The ‘rinse’ mode will also
work when using the hose.
