Taking care of your machine
Removing blockages from brushbar and SpinScrub brushes
Using a pair of scissors
remove any threads or
hair caught around
the brushbar.
Remove both tanks and
tilt carpet washer back.
Using a crosshead screwdriver remove the top and bottom screws from
each of the rug guards (metal pins) and remove to get access to the brushbar.
Lift nozzle release clip
and pull nozzle forward,
separating tabs on nozzle
and carpet washer.
Remove any threads or
hair caught around the
brushes, rinse under
water to remove debris.
Firmly pull sides
of SpinScrub
cover and remove
SpinScrub brushes.
Rinse nozzle under water
to remove dirt/debris.
Replace nozzle by lining
up tabs on nozzle with
tabs underneath front of
carpet washer.
Push nozzle down until
it clicks into place.
Removing and cleaning the nozzle
TIP
Dry vacuum before
washing will help prevent
excessive build up of dirt/
debris in the nozzle
