Vax VX69, Начало работы

Страница: 5 / 20

• Don’t touch any hot areas/accessories on your steam mop. It’s normal for
the steam mop and accessories to heat up during use, always allow them
to cool down before handling
• Don’t use the steam mop if it has been dropped, if there are visible signs of
damage or if it is leaking, if it has been immersed in water or left outdoors
• Don’t handle the plug or use the steam mop with wet hands
• Don’t pull or carry this steam mop by the power cord
• Don’t use the power cord as a handle, pull the power cord around corners
or sharp edges or close a door over the power cord
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to the steam mop, remove blockages only as instructed in this guide
• Don’t unplug steam mop by pulling on the power cord or run over the
power cord. If the power cord or plug is damaged please contact our
Customer Care Line
• Don’t aim the steam mop at people, animals, plants and electrical components
such as interior of ovens or wires. Never touch the floor head from a short
distance (there is a risk of scalding)
• Don’t use the steam mop with incorrect voltage as this may result in damage or injury
to the user. The correct voltage is listed on the ratings label
• Don’t leave this steam mop unattended while it is connected to the supply mains
• Do not use this steam mop with a damaged cord or plug. If the supply cord is damaged
return the steam mop to an authorised Service Agent
• Do not use without the tank cap in place. Ensure that the water tank cap has been
screwed down fully before use
• Never immerse the steam mop in water or in other liquids
• Do not operate the steam mop without water in the tank
• Do not use the unit on leather, wax polished furniture or floors, synthetic fabrics, velvet
or other delicate steam or water sensitive materials
• Do not use on acrylic surfaces
• Do not overfill the tank. Do not exceed the maximum prescribed filling level
WARNING: Never leave the steam mop in one spot on any surface for an extended period
of time, as this may damage the floor surface.
• The force and heat of the steam may have an adverse effect on some materials.
Always check whether a surface is suitable for treatment with the steam by carrying out
a test before hand on a concealed area
• The steam mop must be kept level during operation
• Always remove the mains plug from the socket and allow the steam mop to cool down
completely before topping up with water
• In wet rooms, e.g. bathrooms, connect the appliance to sockets with an RCD adaptor
connected in series
• Be very careful when cleaning tiled walls with sockets
WARNING:
Always switch off and unplug the steam mop from the electrical outlet before
assembling, opening or emptying the water tank, or before connecting/disconnecting the
attachments.