Vax VX69, Начало работы

Страница: 12 / 20

Using your machine
Refreshing Carpets
Using your machine
Place the Microfi bre
Pad on the fl oor white
side facing up. Place
steamer onto pad
making sure the entire
pad covers the fl oorhead.
Twist the steam control
dial to desired setting.
Steam is activated
automatically. Take care
when changing settings
during cleaning.
With Microfi bre Pad
attached, push
steamer into front
of the Carpet Glider,
then place back of
the fl oorhead into
the clip. The Carpet
Glider should only
be used when
refreshing carpets.
Plug into mains, turn dial
to ‘ON’ position, the red
light will illuminate to
indicate power on. There
will be no sounds for the
fi rst 30 seconds whilst it
is heating up.
Place your foot on
fl oorhead and pull
handle backwards
to recline.
Move the steamer slowly
backwards and forwards
across the carpet paying
particular attention to
high traffi c areas.
To release the Carpet
Glider, place your foot
on clip and push down.
Lift steamer to remove.
IMPORTANT: When using on carpets, always make sure the Microfi bre Pad is used and covers the fl oorhead
entirely before using the Carpet Glider. Only use the Carpet Glider when refreshing carpets, not for hard fl oors.