---
Operation
S2 Hard Floor Master User Guide v1.1.qxd:User guide 6/10/10 11:36 Page 6
---
Operation
S2 Hard Floor Master User Guide v1.1.qxd:User guide 6/10/10 11:36 Page 6
7
vax.com.au
WARNING:
Your Steam Mop is designed to clean carpets or rugs that will withstand high
heat. Be sure to check the Use and Care Instructions from the carpet manufacturer before
steam cleaning.
WARNING:
The carpet glider accessory is for use on carpeting and rugs only. Use of
the carpet glider on other floor will cause streaking and possible scratching of the floor’s
surface.
IMPORTANT:
Never use the Steam Mop without the microfiber cleaning pad properly
attached to the mop head.
IMPORTANT:
Check the water tank viewing window to be sure there is adequate water in
the water tank.
CAUTION:
Never use the carpet glider on surfaces that are prone to scratching.
CAUTION:
The Steam Mop emits steam and creates moisture. If the Steam Mop operates
too long in one place, water marks can result.
IMPORTANT:
Pay attention to the water tank’s viewing window to monitor remaining
water/steam. As the water tank empties, a special water sensor will cause the unit to work
intermittently and eventually stop running in order to protect the pump inside the unit. A vibrating
sound may be heard, and the green indicator light will turn orange. The pump will turn OFF.
WARNING:
Never leave the Steam Mop in one spot on any surface for an extended period
of time as this may damage the floor surface. Always return the mop back to the resting tray
when not in use or when not continuously moving across the floor.
Attach carpet glider
attachment to floor
head by pushing the
steam stick onto it.
To recline the unit
place foot on floor
head and tilt handle.
To produce steam
squeeze the trigger.
If you want to stop
the steam, press the
trigger again.
Move the steam stick
slowly backwards and
forwards across the floor
paying particular attention
to high traffic areas.
Refreshing carpets
For best results, thoroughly vacuum the carpets or rugs prior to steam cleaning.
1. Place the mop head (with microfiber cleaning pad in place) on top of the carpet glider.
2. Do not attempt to use the Steam Mop on carpet/rug surfaces without the carpet glider in place!
