---
Operation
S2 Hard Floor Master User Guide v1.1.qxd:User guide 6/10/10 11:36 Page 6
Vax Careline Australia: 1300 361 505
New Zealand: 0800 800 900
6
WARNING:
Never leave the stick steamer in one spot on any surface for an extended
period of time as this may damage the floor surface. Place on the resting tray whilst the
steam is heating and when the product is not moving continuously on the floor.
WARNING:
Your stick steamer should only be used on tiles, lino or sealed wood
flooring. Do not use on laminated flooring and if using the product on floating floor boards –
check with the manufacturer of this flooring before use if it is suitable.
WARNING:
Never use the steam stick without the microfibre cleaning pad properly
attached to the floor head.
WARNING:
To reduce the risk of personal injury, unplug the steamer when assembling
the accessories.
IMPORTANT:
Check the water tank viewing window to ensure there is adequate water in
the water tank.
IMPORTANT:
Do not put solutions or detergents into the water tank. This machine
operates with water & steam only.
Plug into mains and
wait for the green light
(on the main body) to
switch on. This takes
approx. 30 seconds.
To recline the unit
place foot on floor
head and tilt handle.
To produce steam
squeeze the trigger.
A hissing noise will be
heard as the steam
begins. Steam will wet
the microfibre cleaning
pad. If you want to
stop the steam, press
the trigger again.
Move the steam stick
slowly backwards and
forwards across the floor
paying particular attention
to high traffic areas.
Steam cleaning hard floors
