Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
5
Operation
Assembling your stick steam cleaner
Before you begin cleaning
Remove the clean water
tank by pressing the tank
release clip.
Twist the cap anticlockwise
to remove.
Fill the tank with 400ml
of water and replace the
water cap. Tighten by
twisting clockwise.
DO NOT OVERFILL.
For best results, thoroughly sweep or vacuum floors prior to cleaning with the steam mop.
WARNING:
To reduce the risk of personal injury, unplug the steamer when assembling the unit.
Replace the clean water tank, clicking into place making sure the hard water filter is in place.
NOTE:
In hard water areas, or to prevent calcium and mineral deposits from accumulating on the heating
element and mop head, you may use distilled or demineralised water in place of tap water.
Insert the handle onto the
middle section and screw
both parts together.
There are 2 screws – one
on the side of the unit
and the other inside the
cord clip.
Insert the steam floor head
at the bottom end of the
middle section, you must
hear it click into place.
Содержание VSTDUO1600
Страница 2: ...Vax Service line AU 1300 361 505 NZ 0800 800 900...
Страница 17: ...vax com au 16 Notes...
Страница 18: ...Vax Service line AU 1300 361 505 NZ 0800 800 900 17 Notes...
Страница 19: ...vax com au 18 Notes...