Vax VSTDUO1600, Руководство пользователя

Страница: 9 / 20

vax.com.au
8
Operation
Refreshing carpets
Attach carpet glider
attachment to fl oor head
by pushing the steam stick
onto it. To recline the unit place
foot on fl oor head and
tilt handle. To produce steam squeeze
the trigger. Move the steam stick
slowly backwards and
forwards across the fl oor
paying particular attention
to high traffi c areas.
WARNING:
Your Steam Mop is designed to refresh carpets or rugs that will withstand high heat. Be sure
to check the Use and Care Instructions from the carpet manufacturer before steam cleaning.
WARNING: The carpet glider accessory is for use on carpeting and rugs only. Use of the carpet glider on
other floor will cause streaking and possible scratching of the floor’s surface.
IMPORTANT:
Never use the Steam Mop without the microfibre cleaning pad properly attached to the
mop head.
IMPORTANT: Check the water tank viewing window to be sure there is adequate water in the water tank.
CAUTION: The Steam Mop emits steam and creates moisture. If the Steam Mop operates too long in one
place, water marks can result.
For best results, thoroughly vacuum the carpets or rugs prior to steam cleaning.
1. Place the mop head (with microfibre cleaning pad in place) on top of the carpet glider.
2. Do not attempt to use the Steam Mop on carpet/rug surfaces without the carpet glider in place!
WARNING: Never leave the Steam Mop in one spot on any surface for an extended period of time as this
may damage the fl oor surface. Always return the mop back to the resting tray when not in use or when
not continuously moving across the fl oor.