![background image](http://html1.mh-extra.com/html/vax/vcsd-03/vcsd-03_user-manual_3717669008.webp)
Preparation
BATTERY AND CHARGER
!
!
!
!
CAUTION:
The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not
disassemble or heat above manufacturer’s maximum temperature limit (60°C/140°F) or incinerate. Replace the
battery with a Vax Commercial battery only. Use of another battery may present a risk of fire or explosion. Dispose of the
used battery promptly. Keep away from children. Do not disassemble and do not dispose of in fire. Do not attempt to
disassemble the battery or remove any component projecting from the battery terminals. The battery and charger have no
user serviceable parts. Prior to disposal, protect the exposed terminals with heavy insulating tape to prevent shorting.
!
!
!
!
CAUTION:
For best performance, the terminals on the battery, battery
charger and the VCSD-03 must be clean and free from dust and dirt.
TIP:
The battery can remain on the battery charger once fully charged.
!
!
!
!
IMPORTANT:
The battery will need charging before first use.
NOTE:
The life expectancy of the battery will vary depending on the usage of
the hard floor cleaner. If you require a replacement battery contact us –
Vax Commercial Careline: (UK) 0330 026 8455.
Press the release button,
hold the base of the battery
charger and lift the battery
to remove.
25% Charged
50% Charged
75% Charged
Fit the battery onto the
battery charger.
The battery charger
indicator will turn blue
when charging. If a red
light appears an error has
occurred, so remove the
battery and re-fit.
The battery will be fully
charged after 3 hours and
the charger indicator will
turn off.
REMOVING THE BATTERY FROM CHARGER
CHARGING THE BATTERY
8 vaxcommercial.co.uk
VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd 8
27/11/2014 08:32