![background image](http://html1.mh-extra.com/html/vax/vcsd-03/vcsd-03_user-manual_3717669011.webp)
Maintenance
Press the release button
on the dirty water tank.
Pull to remove the tank.
Remove the dirty water
tank lid from dirty water
tank and lift the float.
Lift the dirty water tank
clips up and out to release.
Lift to remove the dirty
water tank lid.
Pinch the filter together to
remove from the lid.
Empty the dirty water over
the sink. Rinse the dirty
water tank and lid under
water to remove debris.
Replace the dirty water
tank lid.
Rinse under water (max.
40°C) to remove debris.
Leave to fully dry before
replacing back into the
VCSD-03.
Tilt the dirty water tank
and line up on the
VCSD-03. Push until
it clicks into place.
!
!
!
!
IMPORTANT:
Remove the battery before carrying out maintenance on the machine.
!
!
!
!
IMPORTANT:
Empty and rinse out the clean and dirty water tanks and leave to air dry before replacing.
Do not leave cleaning detergent in the tanks between uses.
NOTE:
The dirty water tank has an automatic shut off to prevent the tank from overflowing. If this is activated,
the VCSD-03 will not pick up and the sound of the motor will change. The dirty water tank will need to be emptied.
EMPTYING THE DIRTY WATER TANK
CLEANING THE FILTER
Vax Commercial Careline: (UK) 0330 026 4275
11
VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd 11
27/11/2014 08:32