background image

!
!

!
!

WARNING:

 Always remove the battery from your machine before 

conducting maintenance or troubleshooting checks.

1.  Carefully read this user guide before starting or using this machine, and 

before performing unscheduled/routine maintenance or any other work 

on or with the machine. 

Ensure full compliance with all instructions provided in this  

user guide and in those for batteries and battery chargers  

(paying particular attention to warnings and danger notices).  

The manufacturer will not be held responsible for injuries to  

persons or damage to property due to non-compliance with the  

aforementioned instructions.

2.   This machine is designed for use on indoor hard floors only.
3.  Do not use charger if the cable is damaged. Contact Vax Commercial 

Careline: (UK) 

0330 026 4275

.

4.  The machine should only be used by personnel who have received 

appropriate training.

5.  To avoid unauthorised use, keep the machine in a place that denies access to 

unauthorised personnel when not being used.

6.  This commercial appliance should not be used by those under 13 years and 

persons with reduced physical, sensory or mental capabilities.  

The machine should not be used without the appropriate training.

7.  Do not operate this machine for any other purpose except for the use for 

which it was specifically designed. Evaluate the type of building where it will 

be used and comply with the current safety regulations and conditions.

8.  Do not use the machine in places without adequate lighting, in explosive 

environments, when harmful dirt is present (dust, gas, etc.), on roads or 

public passageways and in outdoor environments in general.

General Safety Information

2 vaxcommercial.co.uk

VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd   2

27/11/2014   08:32

Содержание VCSD-03

















Отзывы: