vax.co.uk
4
assembly/ operation
3. Assembly
Putting your cleaner together
Insert middle frame to machine base (Fig 3/1).
Insert one screw on either side of middle frame to secure
(Fig 3/2).
Slide the upper handle down onto the unit. The handle
will click and lock in place. Run the mains wire above the
upper cord hook and secure with the cord clip (Fig 3/3).
4. Operation
IMPORTANT: Turn off when emptying and filling
the tanks and performing any maintenance.
Grasp the solution reservoir under the handle and press
the handle release lever in (Fig 4/1).
Tilt the solution reservoir away from the cleaner and
remove (Fig 4/2).
Unscrew the cap from the bottom of the solution
reservoir (Fig 4/3).
Pour the correct amount of Vax Cleaning Solution as
directed into the clean water tank
Fig.3/3
Fig.4/1
Fig.4/2
Fig.4/3
!
Fig.3/2
Fig.3/1
V-135 Series Rapide Spring User Guide.qxd:V-135B User Guide 20/8/09 09:10 Page 4