Vax V-002 mojo II, Инструкция по эксплуатации

Страница: 5 / 12

5
Carry Handle
Use the carry handle located on the top of the
vacuum cleaner to move from room to room.
(Fig.4/4).
Hose Storage
1. For convenience there is a slot located at the
back of the vacuum cleaner where the floor tool
and hose can be parked for carrying and
storage.
2. For storage, the vacuum cleaner can also be
stood in an upright position. Another slot is
located on the underside of the cleaner to park
the floor tool and hose using the hook on the on-
hose tool storage.
5. Accessories
1. The accessories can be attached directly to the
handle by removing the tubes and floor head
tubes and pushing in the desired accessory
(Fig.5/1).
2. The accessories can also be attached to one or
two extension tubes for extra reach. Remove
the combination floor tool and push on the
desired accessory.
Crevice tool : For crevices, corners, cracks etc.
Dusting brush : Push the brush section securely on
to the end of the crevice tool. For delicate surfaces
and skirting boards.
How to Operate/Accessories/Dust Bag & Filters: Removal & Replacement
Fig.4/4
6. Dust Bag & Filters:
Removal & Replacement
IMPORTANT : Always unplug the vacuum cleaner
from the electrical outlet before removing the dust
bag.
IMPORTANT : Do NOT use the vacuum cleaner
without ALL of the filters in place.
IMPORTANT : The vacuum cleaner is equipped with
a dust bag indicator. If the indicator turns red, the
bag will need to be changed.
1. Turn off the vacuum cleaner and unplug from
the electrical outlet. Lift up the top cover to gain
access to the dust bag compartment (Fig.6/1).
2. Push in the tab to unlock the bag from position
and lift out (Fig.6/2).
3. Dispose of the full dust bag and insert a new
dust bag. Click into place, then close the top
cover.
Pre-motor Filter
1. Turn off the vacuum cleaner and unplug from the
electrical outlet. Lift up the top cover to gain
access to the dust bag compartment.
Fig.6/1
Fig.5/1
Fig.6/2
Vax V-002 mojo D6 bf 6/21/05 2:51 PM Page 5