background image

24hr

MAX

40˚C 

Press dirt container  

release button to remove  

the dirt container

Emptying and cleaning the dirt container

Cleaning the pre-motor filter

Extension tube

Using your machine

Taking care of your machine

Remove hose end from 

the floorhead

Remove extension tube 

from inside the handle

Hold the machine to steady when using on the stairs.  

Always make sure the brushbar is overhanging the stair tread during use 

Hold dirt container over 

a bin and unclip the lock 

on the bottom of the dirt 

container, allowing the 

dirt to fall out

Close the base of the dirt 

container, align the dirt 

container base back onto 

the machine and push until 

it clicks back into place

Choose an accessory

Turn the extension tube 

and attach to the handle

Turn the dirt container  

lid anti-clockwise 

to remove

Remove the filter

Attach accessory adapter

to hose end

Attach hose to the top of  

the handle

Lift the dirt container lid  

to remove

Tap the filter over a bin to 

release and dirt

Using accessories

If required use tool 

connector

Push accessory on to the 

extension tube

Using your machine on the stairs

This machine has a constantly 

rotating brushbar. When using the 

machine on stairs, ensure the height 

adjuster dial is set to hard floor and 

the brushbar is overhanging the 

stair tread (as pictured). Always take  

extra care when cleaning stairs.

WARNING

Wash the filter under 

running water (40°C max)

Leave to fully dry for a least 

24 hours before placing 

back in the machine

TIP

Wash filters with warm 

water (MAX 40°C) at least 

every 3 months.

Содержание U86-IAe Series










Отзывы: